• Tel: +86-13646187144
  • Email: [email protected]
  • Website: www.fgwater.com
  • Language switching:

    Evoqua Electrodeionization EDI Stack Modules

    Evoqua CEDI IP-LXM10Z-1 CEDI Industrial Electrodeionization Module Max Temperature 45°C Flow 1.1m³/h Length13.69 inch(34.8cm) - BrandEvoquaReplaced byIP-LXM10X-4TypeCEDIFeed Water Conductivity µS/cm40Product Resistivity MΩ/cm16Total Hardness ppm1.0Inlet Pressure bar7Inlet Pressure psi100Max Temperature °C45Max Temperature °F113pH range4-11Flow m3/h1.1Flow rate gpm/ft25.0Length in inch13.69Length in cm34.8Shipping Weight

    Evoqua CEDI IP-LXM10Z-1 CEDI Industrial Electrodeionization Module Max Temperature 45°C Flow 1.1m³/h Length13.69 inch(34.8cm)

    Advantages of VNX and Ionpure Modules for Electrodeionization Systems

    VNX Modules

    - Cost Reduction for High Flow Rate CEDI Systems: Developed to significantly decrease the overall cost of building systems that require high flow rates for CEDI (Continuous Electrodeionization) processes.

    - Environmentally Friendly Alternative: Makes it easier to choose a clean and environmentally compatible technology compared to chemically regenerated mixed bed ion exchange systems.

    - Simplified Piping and Assembly: Higher flow rates mean fewer modules are required, which leads to easier piping and system assembly.

    - Built-in Support System: Allows for intelligent skid design, resulting in minimal skid costs and enhanced overall system efficiency.

    Ionpure LX Modules for Industrial Applications

    - Industrial-Grade Design: Specifically tailored to meet the demands of industrial applications.

    - Maximum Reliability: Consistently delivers high reliability and unmatched performance across various applications.

    - Superior Performance: Ideal for power, HPI/CPI, general electronics, food and beverage, and laboratory applications.

    - No Regeneration Downtime: Ensures continuous and uninterrupted service without the need for regeneration.

    Ionpure MX Series CEDI Modules

    - Ideal for Lower Flow Applications: Delivers superior performance for laboratory and lower flow process applications.

    - Complementary to RO Systems: An excellent complement for light industrial, commercial, and laboratory RO (Reverse Osmosis) systems, whether wall-mounted or cabinet-housed.

    Parameter data

    Brand

    Evoqua

    Replaced by

    IP-LXM10X-4

    Type

    CEDI

    Feed Water Conductivity µS/cm

    40

    Product Resistivity MΩ/cm

    16

    Total Hardness ppm

    1.0

    Inlet Pressure bar

    7

    Inlet Pressure psi

    100

    Max Temperature °C

    45

    Max Temperature °F

    113

    pH range

    4-11

    Flow m3/h

    1.1

    Flow rate gpm/ft2

    5.0

    Length in inch

    13.69

    Length in cm

    34.8

    Shipping Weight kg

    91

    Shipping Weight lbs

    200

    Application

    Industrial / Power

    LX-Z Series Features

    • Operating costs are substantially lower compared to traditional ion exchange methods.

    • Generates deionized water of mixed-bed quality, all without the use of chemicals.

    • Ensures consistent water quality through continuous production, rather than batch processes.

    • Features a double O-ring seal for leak-free and reliable operation.

    • Eliminates the need for acids, bases, neutralization systems, or replaceable DI tanks.

    • Resin-filled concentrate ensures optimal performance and user-friendly operation.

    • Provides continuous, uninterrupted operation.

    • Can handle feed water with up to 0.05 ppm total chlorine (CI2).

    • Offers a wide flow range per module, from 0.22 m³/h (1 gpm) to 7.67 m³/h (33.8 gpm).

    • Materials in contact with water comply with NSF® 14 and NSF® 61 standards for food safety and drinking water quality.

    image.png


    QUALITY ASSURANCE STANDARDS

    CE mark certification, each module is strictly tested before leaving the factory to meet the high standards of the industry and is manufactured under the conditions of complying with ISO 9001 and ISO 14000 quality and environmental management system standards.

    1.jpg

    About the operating environment of the IONPURE LX-Z module:

    The module should be installed indoors, away from direct sunlight, and ensure that the ambient temperature does not exceed 113°F (45°C) to ensure its stable and efficient operation. This can effectively extend the service life of the module while ensuring the stability and reliability of the water quality.

    2.jpg

    TYPICAL MODULE PERFORMANCE

    Operating Parameters


    Recovery

    90–95%

    DC Voltage

    0–400

    DC Amperage

    1.0–6.0

    Product Water Quality


    Product Resistivity

    Minimum Flow > 17 MW-cm*† Maximum Flow > 7 MW-cm*†

    Silica (SiO2) Removal

    90–99%, depending on feed conditions

    * Actual performance can be accurately estimated using the IP-Pro prediction tool provided by Ionpure.

    *Performance data is based on testing at the maximum inlet water conductivity equivalent value (40 μS/cm), ensuring excellent deionization results in various application scenarios.


    FEED WATER SPECIFICATIONS

    Feed Water Conductivity Equivalent, including CO2 and Silica

    < 40 μS/cm

    Feed Water Source

    RO permeate

    Temperature

    5–45˚C (41–113˚F)

    Inlet Pressure

    1.4–6.9 bar (20–100 psig)

    Maximum Total Chlorine (as Cl2)

    < 0.05 ppm

    Iron (as Fe)

    < 0.01 ppm

    Manganese (as Mn)

    < 0.01 ppm

    Sulfide (S2-)

    < 0.01 ppm

    pH

    4–11

    Total Hardness (as CaCO3)

    < 1.0 ppm

    Dissolved Organics (TOC as C)

    < 0.5 ppm

    Silica (SiO2)

    < 1.0 ppm


    PHYSICAL SPECIFICATIONS

    Item Number

    L +/- 6.4 mm (0.25")

    C +/- 3.2 mm (0.13")

    LXM04Z

    257 mm (10.12")

    146.8 mm (5.78")

    LXM10Z

    347.7 mm (13.69")

    235.7 mm (9.28")

    LXM18Z

    488.2 mm (19.22")

    353.8 mm (13.93")

    LXM24Z

    601.7 mm (23.69")

    442.7 mm (17.43")

    LXM30Z

    696.5 mm (27.42")

    531.3 mm (20.92")

    LXM45Z

    907.3 mm (35.72")

    747.7 mm (29.44")

    LX8000Z

    1062 mm (41.81")

    888 mm (34.95")




    4.jpg

    E-Cell EDI Technology Performance Examples

    image.png

    E-Cell EDI technology has been successfully applied in various industries such as power, petroleum, chemical, steel, pharmaceutical, and electronics.

    1718160818207945.png

    For application cases, please click:https://www.fgwater.com/Industries/


    20240513171725_11559.jpg

    About Us

    FG Water Technologies (www.fgwater.com) is now an organic part of Wuxi Fenigal Science and Technology Co. Ltd., which is a high-tech entity integrating water treatment quipment design, manufacturing, trading and shipment served for main industrial sectors.


    HAFE-FG Water Technologies has focused on the research of water treatment technology, equipment development and manufacturing, testing and international shipment etc. We work with many leading large-scale or small-medium original equipment manufacturers in China High-tech Development Zones, and engaged ourselves in R&D, manufacturing, and quality testing.

    Our main products include a variety of water purification and different treatment equipment, such as seawater reverse osmosis (SWRO) system, brackish water rever osmosis (BWRO), ultrafiltration (UF)system, Electrodeionization/EDI equipment, media pressure filters and ion exchanger softeners. So far, our company has become a major water treatment equipment supplier for food and beverage industry, pharmaceutical industry, chemical industry, electric power industry, urban water supply industry, municipal and industrial wastewater treatment and more industries, as well as being an exporter to more than 20 countries and regions in Asia, Europe, the Americas, Africa, etc.

    OUR CLIENTS

    PRODUCTION SYSTEM

    Our production system consist of a list of industry-specialized partnership factories accross China. Some of them singularly cover an area of over 10,000 square meters, including 5,000 square meters of workshop and warehouse and 1,500 square meters of office buildings. All of our technical staff has more than 10 years of experience in the design of water treatment systems, so we are able to provide the perfect solution for all kinds of water purification and sewage treatment applications.

    Since the establishment, the Company has always regarded quality as the life of our business. We choose the best components only for the production of various water treatment systems. Our systems are easy to use and maintain, and they stays highly reliable even under toughest conditions.