Sunresin IX exchange resin mixed bed

Sunresin's mixed bed water deionzation resins

SEPLITE® MB10 / MB 20 mixed bed resins, consisted of strong acid cation resin and strong base
type 1 anion resins.The resins were prepared with fixed ratio, with the aim of producing high quality purified water.

By using this mixed bed, projects requiring high demineralized water , low silica, TOC could be handled.
Normally this resin was not suggested being regenerated, but if required , by back washing and separating
the anion/cation, the resins could be regenerated separately.

Advantages of mixed bed resin from Sunresin

1)suitable pore diameter, high surface area as well as high selectivity to target substances.

2)good resistance to high temperature, salt, acid and alkali 

3)suitable for various techniques.

4)excellent kinetic properties which leads to high adsorption rate. 

5)Low unpredictable cost, easy operating, and low requirements for physical condition

6)resin being reusable, no secondary pollution

Mixed Bed Resin Precautions:

Resins should be stored in sealed containers or bags where temperature was above 0℃ in dry conditions without exposure to direct sunlight.
Do not mix ion exchange resin with strong oxidizing agents; otherwise it will cause violent reactions.
In case of eyes contact with resins, rinse eyes immediately with plenty of water, and consult a specialist.
Material and samples must be disposed according to local regulations.
Dry polymers will expand when become wetted and may cause an exothermic reaction.
Spilled materials may be slippery.

Main types of Sunresin's premiun grade Mixed Bed Resins 

 MB10    

SEPLITE® MB10 Mixed Bed Resin

SEPLITE®MB10 is a ready to use mixed bed resin, consisted of strong acid cation resin and strong base type 1 anion resins
The resins were prepared with fixed ratio, with the aim of producing high quality purified water.
It could be loaded either in small cartridges and big industrial resin columns.
By using this mixed bed resin, projects requiring high demineralized water and low silica, TOC could be handled.
This resin is widely used in EDM application.

SEPLITE® MB10 Mixed Bed Resin Physical and Chemical Characteristics:

MB20  with color indicator   

MB20

SEPLITE® MB20 Mixed Bed Resin

SEPLITE® MB20 is a ready to use mixed bed resin, consisting of strong acid cation and strong base type 1 anion resins. 

The two components in the mixture are prepared with a defined ratio of 1 volume of cationic component for 1.5 volumes of anionic component offering a high volume capacity with the aim of producing high quality purified water. 

This ready to use mixed bed can be used both in small cartridges systems as well as in big industrial columns. 

By using this mixed bed, projects requiring high quality demineralized water with high resistivity, low silica and TOC can be successfully realized. 

This ready to use mixed bed has been developed with components offering strong color difference so that the MB can be easily separated by back washing allowing the resins to be regenerated separately. 

This ready to use Mixed Bed can be upon request loaded with a color indicator allowing to follow exhaustion. This product can be ordered under the reference: SEPLITE® MB20 IND.

SEPLITE® MB20 Mixed Bed Resin Physical and Chemical Characteristics: