• Tel: +86-13646187144
  • Email: [email protected]
  • Website: www.fgwater.com
  • Language switching:

    Evoqua Electrodeionization EDI Stack Modules

    Evoqua IP-LXM30Z-4 Industrial Electrodeionization Module Weight 270lbs 4-11pH range Application Industrial/Power - The VNX module was developed to lower the cost of constructing high-flow-rate CEDI systems and to facilitate the selection of a clean, environmentally friendly technology instead of chemically regenerated mixed bed ion exchange systems. CEDI modules with higher flow rates simplify piping and system

    Evoqua IP-LXM30Z-4 Industrial Electrodeionization Module Weight 270lbs 4-11pH range Application Industrial/Power

    The VNX module was developed to lower the cost of constructing high-flow-rate CEDI systems and to facilitate the selection of a clean, environmentally friendly technology instead of chemically regenerated mixed bed ion exchange systems. CEDI modules with higher flow rates simplify piping and system assembly by reducing the number of required modules.

    The VNX modules have an in-built support system. This enables intelligent skid design and minimizes skid costs.

    The Ionpure LX modules are precisely engineered for industrial applications. Ionpure modules consistently provide maximum reliability and outstanding performance for power, HPI/CPI, general electronics, food and beverage, and laboratory applications without regeneration downtime.

    The Ionpure MX Series CEDI modules offer superior performance for laboratory and lower-flow process applications. MX modules are an ideal addition for light industrial, commercial, and laboratory RO systems that are wall-mounted or housed in a cabinet. 

    Specifications

    Brand

    Evoqua

    Replaced by

    IP-LXM30X-4

    Type

    CEDI

    pH range

    4-11


    Dimensions / Weights

    Shipping Weight kg

    122

    Shipping Weight lbs

    270

    Application

    Industrial / Power

     

    image.png


    QUALITY ASSURANCE STANDARDS

    CE mark certification, each module is strictly tested before leaving the factory to meet the high standards of the industry and is manufactured under the conditions of complying with ISO 9001 and ISO 14000 quality and environmental management system standards.


    IONPURE LX-Z module has the following significant advantages:

    * Wide flow range, single module flow rate from 0.22 cubic meters/hour (1 gallon/minute) to 10 cubic meters/hour (44 gallons/minute), meeting the needs of various application scenarios.

    * Significantly lower operating costs compared to traditional ion exchange methods.

    * No need to use chemicals to generate mixed-bed quality deionized water.

    * Achieve continuous production rather than batch processing to ensure stable and reliable water quality.

    * Adopt double O-ring sealing design to ensure leak-free operation.

    * No acid, base, neutralization system or replaceable deionized water tank required.

    * Filled with premium resin for optimal performance and ease of operation.

    * Support continuous operation to ensure uninterrupted water supply.

    * Can handle incoming water up to 0.05ppm (total chloride ion content).

    * The material of wet parts complies with NSF® 14 and NSF® 61 standards, which is safe and reliable.

    1.jpg

    About the operating environment of the IONPURE LX-Z module:

    The module should be installed indoors, away from direct sunlight, and ensure that the ambient temperature does not exceed 113°F (45°C) to ensure its stable and efficient operation. This can effectively extend the service life of the module while ensuring the stability and reliability of the water quality.

    2.jpg

    TYPICAL MODULE PERFORMANCE

    Operating Parameters


    Recovery

    90–95%

    DC Voltage

    0–400

    DC Amperage

    1.0–6.0

    Product Water Quality


    Product Resistivity

    Minimum Flow > 17 MW-cm*† Maximum Flow > 7 MW-cm*†

    Silica (SiO2) Removal

    90–99%, depending on feed conditions

    * Actual performance can be accurately estimated using the IP-Pro prediction tool provided by Ionpure.

    *Performance data is based on testing at the maximum inlet water conductivity equivalent value (40 μS/cm), ensuring excellent deionization results in various application scenarios.

    FEED WATER SPECIFICATIONS

    Feed Water Conductivity Equivalent, including CO2 and Silica

    < 40 μS/cm

    Feed Water Source

    RO permeate

    Temperature

    5–45˚C (41–113˚F)

    Inlet Pressure

    1.4–6.9 bar (20–100 psig)

    Maximum Total Chlorine (as Cl2)

    < 0.05 ppm

    Iron (as Fe)

    < 0.01 ppm

    Manganese (as Mn)

    < 0.01 ppm

    Sulfide (S2-)

    < 0.01 ppm

    pH

    4–11

    Total Hardness (as CaCO3)

    < 1.0 ppm

    Dissolved Organics (TOC as C)

    < 0.5 ppm

    Silica (SiO2)

    < 1.0 ppm


    4.jpg

    E-Cell EDI Technology Performance Examples

    image.png

    E-Cell EDI technology has been successfully applied in various industries such as power, petroleum, chemical, steel, pharmaceutical, and electronics.

    1718160818207945.png

    For application cases, please click:https://www.fgwater.com/Industries/


    20240513171725_11559.jpg

    About Us

    FG Water Technologies (www.fgwater.com) is now an organic part of Wuxi Fenigal Science and Technology Co. Ltd., which is a high-tech entity integrating water treatment quipment design, manufacturing, trading and shipment served for main industrial sectors.


    HAFE-FG Water Technologies has focused on the research of water treatment technology, equipment development and manufacturing, testing and international shipment etc. We work with many leading large-scale or small-medium original equipment manufacturers in China High-tech Development Zones, and engaged ourselves in R&D, manufacturing, and quality testing.

    Our main products include a variety of water purification and different treatment equipment, such as seawater reverse osmosis (SWRO) system, brackish water rever osmosis (BWRO), ultrafiltration (UF)system, Electrodeionization/EDI equipment, media pressure filters and ion exchanger softeners. So far, our company has become a major water treatment equipment supplier for food and beverage industry, pharmaceutical industry, chemical industry, electric power industry, urban water supply industry, municipal and industrial wastewater treatment and more industries, as well as being an exporter to more than 20 countries and regions in Asia, Europe, the Americas, Africa, etc.

    OUR CLIENTS

    PRODUCTION SYSTEM

    Our production system consist of a list of industry-specialized partnership factories accross China. Some of them singularly cover an area of over 10,000 square meters, including 5,000 square meters of workshop and warehouse and 1,500 square meters of office buildings. All of our technical staff has more than 10 years of experience in the design of water treatment systems, so we are able to provide the perfect solution for all kinds of water purification and sewage treatment applications.

    Since the establishment, the Company has always regarded quality as the life of our business. We choose the best components only for the production of various water treatment systems. Our systems are easy to use and maintain, and they stays highly reliable even under toughest conditions.